Technotherm Engineers

• Modulating version with PID controller with digital set point display and real time value
• Version with fully electronic Burner Management System available for all models
• Adjustable combustion head for easy regulation and matching with different combustion chambers
• High turndown ratio up to 1:8
• Configurated and special versions on request according to feasibility

Features:

• Two stage version with hydraulic jack or electric servomotor up to MAIOR P 400.1
• Progressive mechanical version with flow return nozzle
• Modulating version with PID system controller with digital set point display and real time value
• Version with fully electronic Burner Management System available for all models
• Version with sliding bars standard for models
• Adjustable combustion head for easy regulation and matching with different combustion chambers

• Light oil and kerosene
• 1 or 2-pipe operation
• 1-stage
• Built-in pressure regulator
• Cartridge filter

• From the suction inlet (S) oil is drawn through the filter (H) to the gear set, where the pressure is increased. When voltage is applied to the NC-valve, it opens and releases oil to the nozzle outlet.
• By means of the diaphragm (D) in the pressure regulator (T), the pressure is kept constant at the value set on adjustment screw (P1).
• In 2-pipe systems the excess oil is led back to the return outlet (R) and the tank.
• In 1-pipe systems with plugged return outlet (R) and screw (A) removed, the oil is returned internally to the gear set.